DIY: Picture frame from IKEA cupboard window

Cupboard frame for $2, what would you make out of it? Picture frame, obviously.

The local IKEA has a “sale” part, where you can get the disassembled exhibited furniture parts for pennies. I’ve found a glassed-window here once, and first idea was to create a picture frame out of it.

Unfortunately, the newer ones are glued, this was nailed on the back, so it could be disassembled and put back together without too much effort.

IKEA window to picture frame 01
IKEA window to picture frame 01

Required tools and materials

  • a good knife
  • board paper (thin)
  • glue spray or equivalent
  • hammer

The process

Turn the window around and pull off the “positioners”. Be careful: the nails are tough, they can easily break out from the plastic. Be patient and watch for a good order in the process.

IKEA window to picture frame 02
IKEA window to picture frame 02

Get the glass out, and cut a similar size out of two board papers. One - a thinner - is going to be needed to be the bearer of the picture, the other will be the inner frame.

Glue the picture you’d like to add onto the middle of the supporter board.

Cut the size of the picture (or a bit smaller, about 5mm smaller on each side) out of the middle of the other board, which is going to be the inner frame.

IKEA window to picture frame 04
IKEA window to picture frame 04

When the glue had dried put it all together: glass, inner frame, supporter with the picture, and put the positioners back also. Hammer the nails back carefully.

IKEA window to picture frame 05
IKEA window to picture frame 05

Reel to picture frame hooks into the original place of the hinges, and you’re done.

IKEA window to picture frame 03
IKEA window to picture frame 03

The result

IKEA window to picture frame 06{



Encourage creation!

If this entry helped you, or you simply liked it, leave a tip.